Heavy traffic areas benefit the most from asphalt sealcoating that is applied as a liquid and then cures to a tough protective surface. Sealcoating is a mixture of sealants and additives that help to reduce damage from the sun’s UV rays along with the heat and friction generated by heavy traffic. Working with an asphalt sealcoating company that knows how to perform this service on areas with a constant flow of traffic reduces downtime on your lot and helps to ensure that the top coat is capable of protecting the pavement under extreme conditions.
How Can Contractors Make Sealcoating Effective for Busy Parking Lots and Roads?
With asphalt sealcoating Treasure Coast contractors should first assess the pavement to determine if there are areas with heavier traffic than others. Your asphalt care company should also ask you about the density of traffic along with the types of vehicles that drive on the area.
Using the specifications you provide, they’ll then prepare a customized mix that includes dry sealant, water and additives. For areas with heavy traffic, your contractor might opt to use aggregates with larger particles that can help to reduce wear and tear.
How Many Coats of Asphalt Sealcoating Are Necessary for High Traffic Areas?
You should always be wary of any contractor that says they only need one coat to sealcoat a parking lot. The general standard is to do two coats when sealcoating a parking lot, but heavy traffic areas may require an additional coat. A third coat might also be applied only in the areas where traffic tends to be the heaviest, such as the entrance or loading zones on a commercial property.
How Can Property Owners Preserve New Asphalt Sealcoating?
Treasure Coast asphalt sealcoating should be done on a dry day when rain is not in the forecast, and you can do your part to help the sealant cure by turning off any sprinklers or irrigation systems that could spray water onto the lot.
You’ll also want to follow the after care instructions that your asphalt sealcoating contractors provide. While you might be eager to let traffic begin flowing normally again, it’s best to prevent cars from driving on the new sealcoat for at least 24 to 48 hours. When in doubt, just ask our contractors to let you know when it’s time to remove the barriers and let vehicles begin using the space.
Work With a Sealcoating Team That’s Experienced With High Traffic Areas
Asphalt Care Services, LLC. knows how to perform sealcoating on heavy traffic areas, and we can help you determine when to sealcoat after your new asphalt paving project. For high traffic lots and roads, you’ll also need to remember to let us know right away when you need asphalt repairs, parking lot maintenance, parking lot striping, traffic signs, speed bumps, concrete bumpers or thermoplastic line striping. Our team understands the unique needs of high traffic areas and will work hard to do the best job possible while minimizing downtime on your property. To get your free quote, call us at 772-773-6172, send an email with your questions to [email protected] or fill out our online form with details about your property’s needs.